• 9,000 Lb. Capacity Bundle Rack
    Hot

    9,000 Lb. Capacity Bundle Rack

    • Patent # 7143901
    • Heavy duty powder coated outside rails are designed with slots to hold 2 x 4
    • 2 x 4
    • Outside rails have 2.5" square holes spaced 5" apart on the top. A steel plate with identical holes is welded and boxed inside the rails, 1" up from the bottom.
    • 2.5" square tube posts with 2.5" square rubber post caps are used to prevent scratches.
    • Rails shipped with 11" connector tube for butting rails together in a straight line.
    • Note: When assembled the overall usable height of the post is 5.5" less than listed.Example: A 72" post will be 66.5" above the top of the outside rail.
  • Miter Up ClampMiter Up Clamp

    Miter Up Clamp

    • Lets craftsmen examine and adjust fit & finish quickly and easily
    • Engineered to create fine miter positions and miter joints on natural & cultured stone
    • Reduces back strain
    • Reduces breakage
    • Cuts labor costs
    • Made of heavy-duty aluminum
    • Depending on unit size L-Clamps vary
  • Bundle Rack – 6,000 lbs.Bundle Rack – 6,000 lbs.
    Hot

    Bundle Rack – 6,000 lbs.

    • CAPACITY: 6,000 lbs. per opening (3,000 lbs. per post evenly distributed)
    • Rails designed with slots to hold 2 x 4’s which protect the slab edges and the finish on the rails (2 x 4’s not included)
    • Complete with 11” connector tube for butting rails together in a straight line for desired length
    • Rails built with 2” square holes spaced 4” apart (10 holes). A steal plate with identical holes is welded and boxed inside the rail, 1” up from the bottom
    • 2” square tube posts and 2” square rubber post caps to separate bundles and slabs
    • Heavy-duty powder coated finish for storing small fabricated parts and cut-offs , standard size slabs and oversized size slabs
    • Post options available for
  • Heavy-Duty Bundle Rack – Long

    Heavy-Duty Bundle Rack – Long

    • Rails designed with slots to hold 2 x 4’s which protect the slab edges and the finish on the rails (2 x 4s not included)
    • Complete with 11" connector tube for butting rails together in a straight line for desired length
    • Rails built with 2.5" square holes spaced 5" apart. A steal plate with identical holes is welded and boxed inside the rail, 1" up from the bottom
    • 2.5" square tube posts and 2.5" square rubber post caps to separate bundles and slab
    • Must have a 12” overhang on each side
    • Heavy-duty powder coated finish
    • NOTE: When assembled the overall height of the posts are 5.5” less then listed (EXAMPLE: 72” post will be 66.5” above the top of the rail)
  • 2″ Post Caps2″ Post Caps

    2″ Post Caps

    • Made of Rubber
    • Scratch resistant
  • 2.5″ Post Caps2.5″ Post Caps

    2.5″ Post Caps

    • Made of Rubber
    • Scratch resistant
  • Universal Storage System Post – USS-P

    Universal Storage System Post – USS-P

    • Posts are 1" diameter steel coated with a galvanized finish.
    • Posts can be removed for easy loading and unloading of product.
    • Heavy Duty 1" O.D. 40"high Post
  • 40″ Post for Bundle Rack40″ Post for Bundle Rack

    40″ Post for Bundle Rack

    • For storing smaller fabricated parts and cut-offs
    • Comes complete with 2" x 2" Post Caps
    • 3,000 lb. capacity per post (when using two next to each other the opening is 6,000 lbs.)
    • Heavy-duty powder coated finish
    • NOTE WITH BUNDLE RACK PACKAGES: When assembled the overall height of the posts are 5.5” less then listed (EXAMPLE: 40” post will be 34.5” above the top of the rail)