• On-Site Delivery TrailerOn-Site Delivery Trailer

    On-Site Delivery Trailer

    • Strong, hot-dip galvanized steel frame and fenders for corrosion resistance
    • Smooth ride on industry leading Dexter Torflex® suspension axle and utilizes a standard hitch for a 2” ball receiver and 7-way light plug for connection to vehicle
    • Aluminum A-frame rack consists of (2) 8' x 7' tall T6 aluminum racks and has extra storage space between racks
    • Full-length rubber padding on horizontal slats and vertical posts
    • Safety breakaway kit designed to stop trailer if it disconnects from vehicle
    • 5” bottom support ledges with rubber block pads
    • (6)T6 adjust-A-poles with rubber triangle cleats
  • Multi-Purpose Glass Storage System – 4,000 lbs.
    Hot

    Multi-Purpose Glass Storage System – 4,000 lbs.

    • CAPACITY: 4,000 lbs. (2,000 lb. between posts)
    • Rails designed with slots to hold 2 x 4’s which protect the slab edges and the finish on the rails (2 x 4s not included). Optional Easy Slide (made of low friction material) can be mounted to the 2 x 4’s for extra protection
    • Center rail with easy slide must be used to support the glass when sliding individual pieces in and out of the rack
    • Complete with 11" connector tube for butting rails together in a straight line for desired length
    • Outside rails built with 2" square holes spaced 4" apart. A steel plate with identical holes is welded and boxed inside the rails, 1" up from the bottom
    • 2" square tube posts and 2" square rubber post caps to separate glass
    • Heavy-duty powder coted finish
  • Universal Storage System – USS-5Universal Storage System – USS-5

    Universal Storage System – USS-5

    • Parts included in package are (2) USS-R, (30) USS-P for a total of 15 openings
    • Outside rails are constructed of extruded aluminum, to provide strong, but lightweight storage solution.
    • Outside rails are designed with slots to hold 2 x 4
    • Outside rails have 1" diameter round holes spaced every 3". A secondary plate with identical holes is located below the top of the rail, 1" from the bottom.
    • Rails are 6" wide x 3" high x 60" long and can butt together for desired length.
    • Posts are 1" diameter steel coated with a galvanized finish.
    • Posts can be removed for easy loading and unloading of product.
  • Econo A-Frame – ECOA
    Hot

    Econo A-Frame – ECOA

    • Heavy duty powder coated finish.
    • Ships knocked down for lower freight cost.
    • Ledge Length 20.5"
    • 6" spread on top of A.
  • Foldable A-Frame – FAF-60Foldable A-Frame – FAF-60

    Foldable A-Frame – FAF-60

    • Heavy duty powder coated finish.
    • Ships knocked down for lower freight cost.
    • Ledge Length 20.5"
    • 6" spread on top of A.
  • Heavy-Duty Transport Rack – TR4482Heavy-Duty Transport Rack – TR4482
    Hot

    Heavy-Duty Transport Rack – TR4482

    • CAPACITY: 4,000 lbs.
    • Hold downs bars have riveted rubber strips the length of the bar
    • Quick release mounting pins change rack from mobile to stationary (Optional caster kit: (4) 8” roller bearing wheels; Two swivel casters with brakes and two ridged)
    • Fork lift hoops mounted on sides
    • Bottom pads and uprights have riveted rubber strips
    • Hot dip galvanized finish
    • 88.7-degree angle
  • Heavy-Duty Transport Rack – TR4496Heavy-Duty Transport Rack – TR4496
    Hot

    Heavy-Duty Transport Rack – TR4496

    • CAPACITY: 4,000 lbs.
    • Hold downs bars have riveted rubber strips the length of the bar
    • Quick release mounting pins change rack from mobile to stationary (Optional caster kit: (4) 8” roller bearing wheels; Two swivel casters with brakes and two ridged)
    • Fork lift hoops mounted on sides
    • Bottom pads and uprights have riveted rubber strips
    • Hot dip galvanized finish
    • 87.21-degree angle
  • Caster Kit for TR4482 and TR4496Caster Kit for TR4482 and TR4496

    Caster Kit for TR4482 and TR4496

    • 8" diameter roller bearing wheels
    • Rated at 1,000 lb. capacity each
    • Two swivel casters with brakes on one end and two rigid on the other
    • Quick release mounting pins and caster stems change rack from mobile to stationary in seconds
  • Tranpsort Rack – 10,000 Lb Capacity – TR-10Tranpsort Rack – 10,000 Lb Capacity – TR-10
    Hot

    Tranpsort Rack – 10,000 Lb Capacity – TR-10

    • Designed for fabrication and transportation of products to the job site (Please see our shop cart or glass carts for additional storage and transportation needs)
    • 10,000 lb. capacity designed to hold all sizes of slabs. The capacity of the TR-10 is reduced to 8,000 lbs. with the use of the CK-8000 caster kit
    • Optional caster package consists of 8" diameter roller bearing wheels rated at 2,000 lbs. each. Two swivel casters with brakes on one end and two rigid on the other
    • 4 hold down ratchet straps secure load
    • 4 adjustable safety posts provide for safe removal of unstrapped loads that may shift unexpectedly
    • Safety posts are stored at the end of the A-Frame during transport
    • Durable galvanized finish
  • Truck Mounted A-Frame – TMA-6078

    Truck Mounted A-Frame – TMA-6078

    • 24,000 lb. total capacity (12,000 lb. capacity per side)
    • Six mounting plates used for bolting to truck or trailer
    • Bottom U-channel is 4" wide with 2" side ledges and is designed to hold 4 x wood to support load (customer furnishes the wood)
    • Rubber-lined uprights
    • Durable galvanized finish
    • Ledge Length 18"
  • 2 Wide L-Rack – L-1022 Wide L-Rack – L-102

    2 Wide L-Rack – L-102

    • SAFETY WARNING: Use holes located in bottom flange for securing rails to floor. SAFETY WARNING: Cases should be set on a 4 degree angle and butt together using spacers approved by your glass supplier, keeping the same 4 degree angle.
    • 60,000 Pound capacity. With 2 L-Uprights.
    • L-102 has a capacity of 15 Cases with 88" linear inch of glass capacity.
    • Connector brace between uprights.
    • Made in USA.
    • Special Order. Please call for lead times and pricing.
  • 3 Wide L-Rack – L-1463 Wide L-Rack – L-146

    3 Wide L-Rack – L-146

    • SAFETY WARNING: Use holes located in bottom flange for securing rails to floor.SAFETY WARNING: Cases should be set on a 4 degree angle and butt together using spacers approved by your glass supplier, keeping the same 4 degree angle.
    • 88,000 Pound capacity. With 3 L-Uprights.
    • L-146 has a capacity of 22 Cases with 124" linear inch of glass capacity.
    • Connector brace between uprights.
    • Made in USA.
    • Special Order. Please call for lead times and pricing.
  • Windshield RacksWindshield Racks
    Hot

    Windshield Racks

    • Freestanding, or space saving wall mounted designs.
    • Steel pegs have durable, easy-to-clean polyethylene covers with plastic caps.
    • Enamel finish protects against rust.
    • Neoprene glass stops are installed on uprights.
    • Assembly requires no special tools, and all hardware is included.
    • Made out of welded steel.
    • GWR-S36LAR Windshield rack is designed to hold larger sized lites.
  • Harp Rack – HR-4860Harp Rack – HR-4860
    Hot

    Harp Rack – HR-4860

    • Uses thick High Density Polyethylene on the floor for easy sliding of glass and provides a non-stick surface for insulated glass.
    • Includes 4 non-marking swivel casters rated at 1000 lbs. capacity each.
    • Two foot locks mounted in front for stability.
    • Gray powder coated finish.
    • Ships knocked down for freight savings.
  • Hold Down Bar for TR4482Hold Down Bar for TR4482

    Hold Down Bar for TR4482

    • Riveted rubber strips run the length of the hold down
    • Complete with strap and ratchet
    • Replacement rubber kit available (RK82) if original rubber becomes damaged
  • Hold Down Bar for TR4496Hold Down Bar for TR4496

    Hold Down Bar for TR4496

    • Riveted rubber strips the length of the bar
    • Complete with strap and ratchet
    • Replacement rubber kit available (RK96) if original rubber becomes damaged
  • Outside Rail – BR-5Outside Rail – BR-5

    Outside Rail – BR-5

    • Patent # 7143901
    • Heavy duty powder coated outside rails are designed with slots to hold 2 x 4
    • 2 x 4
    • Outside rails have 2" square holes spaced 4" apart on the top. A steel plate with identical holes is welded and boxed inside the rails, 1" up from the bottom.
    • Note: When assembled the overall usable height of the post is 5.5" less than listed.Example: A 60" post will be 54.5" above the top of the outside rail.
    • Rails shipped with 11" connector tube for butting rails together in a straight line.
  • Outside Rail with optional Easy Slide – BR-5ESOutside Rail with optional Easy Slide – BR-5ES

    Outside Rail with optional Easy Slide – BR-5ES

    • Patent # 7143901
    • Store loose lites, insulated glass, tempered glass, plastic sheets, shower doors and more. The center rail with easy slide must be used to support the glass when sliding individual pieces in and out of the racks.
    • Easy Slide, a low friction material, is mounted to the rails and posts for ease of sliding products in and out.
    • Outside rails have 2" square holes spaced 4" apart on the top. A steel plate with identical holes is welded and boxed inside the rails, 1" up from the bottom.
    • Note: When assembled the overall usable height of the post is 5.5" less than listed.Example: A 60" post will be 54.5" above the top of the outside rail.
    • Rails shipped with 11" connector tube for butting rails together in a straight line.
  • Center Rail for Multi-Purpose Storage Rack – CR-5

    Center Rail for Multi-Purpose Storage Rack – CR-5

    • The center rail with easy slide must be used to support the glass when sliding individual pieces in and out of the racks.
    • Easy Slide, a low friction material, is mounted to the rails and posts for ease of sliding products in and out.
  • 60″ Post for Bundle Rack60″ Post for Bundle Rack

    60″ Post for Bundle Rack

    • For storing smaller fabricated parts and cut-offs
    • Comes complete with 2" x 2" Post Caps
    • 3,000 lb. capacity per post (when using two next to each other the opening is 6,000 lbs.)
    • Heavy-duty powder coated finish
    • NOTE WITH BUNDLE RACK PACKAGES: When assembled the overall height of the posts are 5.5” less then listed (EXAMPLE: 60” post will be 54.5” above the top of the rail)
  • 80″ Post for Bundle Rack80″ Post for Bundle Rack

    80″ Post for Bundle Rack

    • For storing smaller fabricated parts and cut-offs
    • Comes complete with 2" x 2" Post Caps
    • 3,000 lb. capacity per post (when using two next to each other the opening is 6,000 lbs.)
    • Heavy-duty powder coated finish
    • NOTE WITH BUNDLE RACK PACKAGES: When assembled the overall height of the posts are 5.5” less then listed (EXAMPLE: 80” post will be 74.5” above the top of the rail)
  • 2″ Post Caps2″ Post Caps

    2″ Post Caps

    • Made of Rubber
    • Scratch resistant
  • 60″ Post with Optional Easy Slide – SP-60ES

    60″ Post with Optional Easy Slide – SP-60ES

    • 60" posts for storing smaller fabricated parts and cut-offs
    • 2" square tube posts are used to prevent scratches.
    • Easy Slide, a low friction material, is mounted to the rails and posts for ease of sliding products in and out.
    • Note: When assembled the overall usable height of the post is 5.5" less than listed.Example: A 40" post will be 34.5" above the top of the outside rail.
  • 80″ Post with Optional Easy Slide – SP80ES

    80″ Post with Optional Easy Slide – SP80ES

    • 80" posts for storing smaller fabricated parts and cut-offs
    • 2" square tube posts are used to prevent scratches.
    • Easy Slide, a low friction material, is mounted to the rails and posts for ease of sliding products in and out.
    • Note: When assembled the overall usable height of the post is 5.5" less than listed.Example: A 40" post will be 34.5" above the top of the outside rail.
  • Placeholder

    102″ Post with Optional Easy Slide – SP-102ES

    • 102" posts for storing smaller fabricated parts and cut-offs
    • 2" square tube posts are used to prevent scratches.
    • Easy Slide, a low friction material, is mounted to the rails and posts for ease of sliding products in and out.
    • Note: When assembled the overall usable height of the post is 5.5" less than listed.Example: A 40" post will be 34.5" above the top of the outside rail.
  • Universal Storage System Outside Rail – USS-RUniversal Storage System Outside Rail – USS-R

    Universal Storage System Outside Rail – USS-R

    • Outside rails are constructed of extruded aluminum, to provide strong, but lightweight storage solution.
    • Outside rails are designed with slots to hold 2 x 4
    • Outside rails have 1" diameter round holes spaced every 3". A secondary plate with identical holes is located below the top of the rail, 1" from the bottom.
    • Rails are 6" wide x 3" high x 60" long and can butt together for desired length.
  • Universal Storage System Post – USS-P

    Universal Storage System Post – USS-P

    • Posts are 1" diameter steel coated with a galvanized finish.
    • Posts can be removed for easy loading and unloading of product.
    • Heavy Duty 1" O.D. 40"high Post