• On-Site Delivery TrailerOn-Site Delivery Trailer

    On-Site Delivery Trailer

    • Strong, hot-dip galvanized steel frame and fenders for corrosion resistance
    • Smooth ride on industry leading Dexter Torflex® suspension axle and utilizes a standard hitch for a 2” ball receiver and 7-way light plug for connection to vehicle
    • Aluminum A-frame rack consists of (2) 8' x 7' tall T6 aluminum racks and has extra storage space between racks
    • Full-length rubber padding on horizontal slats and vertical posts
    • Safety breakaway kit designed to stop trailer if it disconnects from vehicle
    • 5” bottom support ledges with rubber block pads
    • (6)T6 adjust-A-poles with rubber triangle cleats
  • Harp Rack – HR-4860Harp Rack – HR-4860
    Hot

    Harp Rack – HR-4860

    • Uses thick High Density Polyethylene on the floor for easy sliding of glass and provides a non-stick surface for insulated glass.
    • Includes 4 non-marking swivel casters rated at 1000 lbs. capacity each.
    • Two foot locks mounted in front for stability.
    • Gray powder coated finish.
    • Ships knocked down for freight savings.
  • 3 Wide L-Rack – L-1463 Wide L-Rack – L-146

    3 Wide L-Rack – L-146

    • SAFETY WARNING: Use holes located in bottom flange for securing rails to floor.SAFETY WARNING: Cases should be set on a 4 degree angle and butt together using spacers approved by your glass supplier, keeping the same 4 degree angle.
    • 88,000 Pound capacity. With 3 L-Uprights.
    • L-146 has a capacity of 22 Cases with 124" linear inch of glass capacity.
    • Connector brace between uprights.
    • Made in USA.
    • Special Order. Please call for lead times and pricing.
  • Foldable A-Frame – FAF-60Foldable A-Frame – FAF-60

    Foldable A-Frame – FAF-60

    • Heavy duty powder coated finish.
    • Ships knocked down for lower freight cost.
    • Ledge Length 20.5"
    • 6" spread on top of A.
  • Placeholder

    102″ Post with Optional Easy Slide – SP-102ES

    • 102" posts for storing smaller fabricated parts and cut-offs
    • 2" square tube posts are used to prevent scratches.
    • Easy Slide, a low friction material, is mounted to the rails and posts for ease of sliding products in and out.
    • Note: When assembled the overall usable height of the post is 5.5" less than listed.Example: A 40" post will be 34.5" above the top of the outside rail.
  • Windshield RacksWindshield Racks
    Hot

    Windshield Racks

    • Freestanding, or space saving wall mounted designs.
    • Steel pegs have durable, easy-to-clean polyethylene covers with plastic caps.
    • Enamel finish protects against rust.
    • Neoprene glass stops are installed on uprights.
    • Assembly requires no special tools, and all hardware is included.
    • Made out of welded steel.
    • GWR-S36LAR Windshield rack is designed to hold larger sized lites.
  • Center Rail for Multi-Purpose Storage Rack – CR-5

    Center Rail for Multi-Purpose Storage Rack – CR-5

    • The center rail with easy slide must be used to support the glass when sliding individual pieces in and out of the racks.
    • Easy Slide, a low friction material, is mounted to the rails and posts for ease of sliding products in and out.
  • 60″ Post with Optional Easy Slide – SP-60ES

    60″ Post with Optional Easy Slide – SP-60ES

    • 60" posts for storing smaller fabricated parts and cut-offs
    • 2" square tube posts are used to prevent scratches.
    • Easy Slide, a low friction material, is mounted to the rails and posts for ease of sliding products in and out.
    • Note: When assembled the overall usable height of the post is 5.5" less than listed.Example: A 40" post will be 34.5" above the top of the outside rail.
  • 80″ Post with Optional Easy Slide – SP80ES

    80″ Post with Optional Easy Slide – SP80ES

    • 80" posts for storing smaller fabricated parts and cut-offs
    • 2" square tube posts are used to prevent scratches.
    • Easy Slide, a low friction material, is mounted to the rails and posts for ease of sliding products in and out.
    • Note: When assembled the overall usable height of the post is 5.5" less than listed.Example: A 40" post will be 34.5" above the top of the outside rail.