• Drywall Cart – DWC

    Drywall Cart – DWC

    • Heavy duty 8" casters (two rigid, one swivel and one swivel with brake).
    • Heavy duty 2,000 pound weight capacity, when evenly distributed.
    • Material can be secured to the cart using hold-down straps (not included).
    • Ships knocked down for freight savings.
    • Gray powder coat finish.
  • Heavy Duty Backsplash Cart – HDBSC8472

    Heavy Duty Backsplash Cart – HDBSC8472

    • Heavy duty 3,200 pound weight capacity, when evenly distributed.
    • Pull handle mounted on one end for maneuverability.
    • Two rigid and two swivel brake 5" casters.
    • Ships knocked down for freight savings.
    • Gray powder coat finish.
    • Shelf dimensions are 77.5" long x 10" deep
  • On-Site Delivery TrailerOn-Site Delivery Trailer

    On-Site Delivery Trailer

    • Strong, hot-dip galvanized steel frame and fenders for corrosion resistance
    • Smooth ride on industry leading Dexter Torflex® suspension axle and utilizes a standard hitch for a 2” ball receiver and 7-way light plug for connection to vehicle
    • Aluminum A-frame rack consists of (2) 8' x 7' tall T6 aluminum racks and has extra storage space between racks
    • Full-length rubber padding on horizontal slats and vertical posts
    • Safety breakaway kit designed to stop trailer if it disconnects from vehicle
    • 5” bottom support ledges with rubber block pads
    • (6)T6 adjust-A-poles with rubber triangle cleats
  • Stone Lifter and Transporter – ST1Stone Lifter and Transporter – ST1
    Hot

    Stone Lifter and Transporter – ST1

    • Features a patented silent winch for easy raising and lowering of stone slabs measuring from 25” to 48” tall by 60” wide and weighing up to 396 lbs.
    • The ST1’s heavy duty lifting mast encloses the steel lifting cable in order to prevent damage to the stone and reduce the possibility for employee injury while operating the winch.
    • The shift to the side function allows the material to be pivoted 90˚ on the axis of the mast to pass through doorways and halls easily.
    • Material can be raised to a maximum height of 63” and rotated 360˚ for easy manipulation and orientation in the installation area.
    • Rubber pads on the carrying brackets protect the stone while being moved.
  • Truck Mounted Windshield Rack

    Truck Mounted Windshield Rack

    • Rubber padding on uprights and base to help prevent material damage
    • Complete with 19” posts
    • Posts are positioned 3” on center
    • Rotating pad on posts have an open/close position to secures the glass in place
    • Heavy-duty, weather resistant, powder coated steel
    • Ships knocked down for freight savings
  • 9,000 Lb. Capacity Bundle Rack
    Hot

    9,000 Lb. Capacity Bundle Rack

    • Patent # 7143901
    • Heavy duty powder coated outside rails are designed with slots to hold 2 x 4
    • 2 x 4
    • Outside rails have 2.5" square holes spaced 5" apart on the top. A steel plate with identical holes is welded and boxed inside the rails, 1" up from the bottom.
    • 2.5" square tube posts with 2.5" square rubber post caps are used to prevent scratches.
    • Rails shipped with 11" connector tube for butting rails together in a straight line.
    • Note: When assembled the overall usable height of the post is 5.5" less than listed.Example: A 72" post will be 66.5" above the top of the outside rail.
  • Heavy-Duty Bundle Rack – Long

    Heavy-Duty Bundle Rack – Long

    • Rails designed with slots to hold 2 x 4’s which protect the slab edges and the finish on the rails (2 x 4s not included)
    • Complete with 11" connector tube for butting rails together in a straight line for desired length
    • Rails built with 2.5" square holes spaced 5" apart. A steal plate with identical holes is welded and boxed inside the rail, 1" up from the bottom
    • 2.5" square tube posts and 2.5" square rubber post caps to separate bundles and slab
    • Must have a 12” overhang on each side
    • Heavy-duty powder coated finish
    • NOTE: When assembled the overall height of the posts are 5.5” less then listed (EXAMPLE: 72” post will be 66.5” above the top of the rail)
  • Bundle Rack – 6,000 lbs.Bundle Rack – 6,000 lbs.
    Hot

    Bundle Rack – 6,000 lbs.

    • CAPACITY: 6,000 lbs. per opening (3,000 lbs. per post evenly distributed)
    • Rails designed with slots to hold 2 x 4’s which protect the slab edges and the finish on the rails (2 x 4’s not included)
    • Complete with 11” connector tube for butting rails together in a straight line for desired length
    • Rails built with 2” square holes spaced 4” apart (10 holes). A steal plate with identical holes is welded and boxed inside the rail, 1” up from the bottom
    • 2” square tube posts and 2” square rubber post caps to separate bundles and slabs
    • Heavy-duty powder coated finish for storing small fabricated parts and cut-offs , standard size slabs and oversized size slabs
    • Post options available for
  • Universal Storage System – USS-5Universal Storage System – USS-5

    Universal Storage System – USS-5

    • Parts included in package are (2) USS-R, (30) USS-P for a total of 15 openings
    • Outside rails are constructed of extruded aluminum, to provide strong, but lightweight storage solution.
    • Outside rails are designed with slots to hold 2 x 4
    • Outside rails have 1" diameter round holes spaced every 3". A secondary plate with identical holes is located below the top of the rail, 1" from the bottom.
    • Rails are 6" wide x 3" high x 60" long and can butt together for desired length.
    • Posts are 1" diameter steel coated with a galvanized finish.
    • Posts can be removed for easy loading and unloading of product.